August 12, 2019 at 7:47 am #497
We are experiencing some problems while paring the control hub. The wifi connection and heartbeat is normal but there is “no voltage sensor” on the tablet. And we can not add and change the robot configuration. There are no selectable menus appear. We tried to reset the control hub following the manual but failed. The problem continues.
August 12, 2019 at 12:44 pm #502
Note for others reading this: Embedded images from sms.ms don’t work on the forum. Here are the direct links to the images posted:
To confirm, you have this problem even after restarting the robot (just unplug and plug in the battery), correct?
Does your Driver Station display a message saying “Resetting access point to default name and password” when the Control Hub turns on?
Does the light on the Control Hub stay blue, or does it turn green and blink blue occasionally?
August 12, 2019 at 1:47 pm #504
hexugo, it would also help to see the Control Hub’s Robot Controller Logs. Please connect to the Hub’s Program and Manage web interface, navigate to the Manage tab, and click the Download Logs button. You can share the text file using a site like gist.github.com or pastebin.com.
August 13, 2019 at 5:49 am #507
I’m back, I didn’t find the message there.
Here is the log.
August 13, 2019 at 2:36 am #506
Thanks for reply.
Yes, the problem is still there after I unplug the battery. And the light just stays blue. I will check out if there is the message about resetting AP default and upload the log later.
You must be logged in to reply to this topic.